How to connect meeting room display on Q-Cal.
1. Select "Screens" in the top menu to navigate to the screen overview.
2. Find and click on "Meeting Room Display" to open the options for meeting room screens.
3. Click on "Add Screen" to start the process of adding a new screen.
4. Enter the 4-digit code displayed on the physical screen into the designated field to pair the screen with the system.
5. After pairing, select the desired design and confirm your choice by clicking "Save & Close."
Related Articles
Updating Meeting Room Displays
The Q-Cal Booking app is easily updated directly from App.q-cal.net. This guide works from Q-Cal Booking app 2.0 and up. If the app is version 2.0 or below, follow this guide instead. Q-Cal booking App - ProDVX Go to Views > Meeting Room displays. ...How to use time management on Q-Cal meeting room screens
When using time management on meeting room screens, the screen will be turned off at a specific time selected. The time management is done at group level and is controlled from app.q-cal.net 1. Go to Views and select Meeting Room Displays. 2. Select ...Update from UniteConnectBooking to the Q-Cal booking App - ProDVX
It is always important that the Q-Cal Booking app on the meeting room screen is updated to the latest version. This guide describes how to update a screen from an old UniteConnect app to the latest Q-Cal Booking app from NordicScreen. This guide is ...How to close the Q-Cal Android App
To access settings on the ProDVX screen, the Q-Cal app must be removed from Home app mode. This is done by following this guide. 1. Press the following combo station on the volume buttons: 2 x Vol Down + 5 x Vol Up. 2. Then tap on Disable Home App ...How to find the version of the Q-Cal Booking App
This guide shows where the Q-Cal Booking app version is located. 1. Go to Views> Meeting Room Displays 2. Each device has a version that can be viewed from the side. If the device has verison below 2.0, updating requires a reset of the device. This ...