How to find the version of the Q-Cal Booking App

This guide shows where the Q-Cal Booking app version is located.

1. Go to Views> Meeting Room Displays

2. Each device has a version that can be viewed from the side.

Meeting Room Displays management interface with a list of devices, showing different software versions and their status

If the device has verison below 2.0, updating requires a reset of the device. This is done by following this guide: UniteConncetBooking to Q-Cal booking App - ProDVX

Related Articles
Q-Cal booking app - Advanced
Instructions on setting up Q-Cal Android app. Note: For references below to “website”, see https://app.q-cal.net/Views/MeetingRooms/ The Q-Cal Android app is compatible with devices running Android 4.1 up to at least Android 8.1. When installing the ...
Update from UniteConnectBooking to the Q-Cal booking App - ProDVX
It is always important that the Q-Cal Booking app on the meeting room screen is updated to the latest version. This guide describes how to update a screen from an old UniteConnect app to the latest Q-Cal Booking app from NordicScreen. This guide is ...
How to close the Q-Cal Android App
To access settings on the ProDVX screen, the Q-Cal app must be removed from Home app mode. This is done by following this guide. 1. Press the following combo station on the volume buttons: 2 x Vol Down + 5 x Vol Up. 2. Then tap on Disable Home App ...
How to remove the UniteConnect App
This guide describes how to remove an old UniteConnect app so that the latest version of the Q-Cal Booking app can be installed on the device. Following this guide will remove all content on the screen. Connection to Q-Cal is subsequently made again. ...
How to Close Q-Cal on an Android Screen
Introduction: This guide explains how to disable Q-Cal as the active “Home app” on an Android screen. By following these steps, you will gain full access to the Android system and be able to use the screen without the Q-Cal interface. The guide is ...

Related Articles