This guide will tell you everything you need to know on your Rasberry PI Devices.
- Please note that this guide only supports the Raspbian OS
Getting started
Q-Play on a Raspberry PI (Linux software) is a really good basic player, that can easily show pictures and other simple content. Raspberry PI is a small and price friendly unit with limited knowledge. This you should consider before choosing Raspberry PI.
A Raspberry PI is not made for bigger video content. Do you wish to settle for bigger videos, we will recommend that you use a hardware, that dimensioned for the wished setup.
Down below is our recommend Raspberry PI setup, to obtain the best settlement of Q-Play.
Notice:
The cooling should be dimensioned after the environment where is it installed.
Continuing playback of video can cause a high load, therefore we recommended an ekstra cooling.
Do you wish to primarily have video on your Q-Play, we will recommended our standard HMDI Player.
How to install Q-Play on Raspberry Pi
How to close down q-play on you device
If you need to set up your wifi or other settings in Linux, it can require to close down Q-play. Follow this guide.
First connect a USB keyboard to the unit
Press thereafter CTRL + ALT + D .
The app can now be closed by using the top-menu
When the app is closed down, it is possible to creative the wished settings.
After finished set up, follow the steps below
Restart the unit.
Check that the Q-Play app will start, after the reset
- The solution are now in operation again
Need more help or have any questions? You can always contact our support team here. We are happy to help!