General
How to Close Q-Cal on an Android Screen
Introduction: This guide explains how to disable Q-Cal as the active “Home app” on an Android screen. By following these steps, you will gain full access to the Android system and be able to use the screen without the Q-Cal interface. The guide is ...
Troubleshooting Printer Issues at the Visitor Management
If your printer at the Visitor Management station is not printing paper, follow this guide to resolve the issue. Basic Checks First, check the following three things: Is the printer turned on and showing a green light? Ensure that the printer is ...
How to connect meeting room display on Q-Cal.
1. Select "Screens" in the top menu to navigate to the screen overview. 2. Find and click on "Meeting Room Display" to open the options for meeting room screens. 3. Click on "Add Screen" to start the process of adding a new screen. 4. Enter the ...
How to close the Q-Cal Android App
To access settings on the ProDVX screen, the Q-Cal app must be removed from Home app mode. This is done by following this guide. 1. Press the following combo station on the volume buttons: 2 x Vol Down + 5 x Vol Up. 2. Then tap on Disable Home App ...
Q-Cal booking app - Advanced
Instructions on setting up Q-Cal Android app. Note: For references below to “website”, see https://app.q-cal.net/Views/MeetingRooms/ The Q-Cal Android app is compatible with devices running Android 4.1 up to at least Android 8.1. When installing the ...
Update from UniteConnectBooking to the Q-Cal booking App - ProDVX
It is always important that the Q-Cal Booking app on the meeting room screen is updated to the latest version. This guide describes how to update a screen from an old UniteConnect app to the latest Q-Cal Booking app from NordicScreen. This guide is ...
Updating Meeting Room Displays
The Q-Cal Booking app is easily updated directly from App.q-cal.net. This guide works from Q-Cal Booking app 2.0 and up. If the app is version 2.0 or below, follow this guide instead. Q-Cal booking App - ProDVX Go to Views > Meeting Room displays. ...
How to find the version of the Q-Cal Booking App
This guide shows where the Q-Cal Booking app version is located. 1. Go to Views> Meeting Room Displays 2. Each device has a version that can be viewed from the side. If the device has verison below 2.0, updating requires a reset of the device. This ...
How to remove the UniteConnect App
This guide describes how to remove an old UniteConnect app so that the latest version of the Q-Cal Booking app can be installed on the device. Following this guide will remove all content on the screen. Connection to Q-Cal is subsequently made again. ...
How to use time management on Q-Cal meeting room screens
When using time management on meeting room screens, the screen will be turned off at a specific time selected. The time management is done at group level and is controlled from app.q-cal.net 1. Go to Views and select Meeting Room Displays. 2. Select ...