How to find the Wi-Fi MAC address on an X96H

How to find the Wi-Fi MAC address on an X96H

To find your Wi-Fi MAC address on the X96H player, you need to use the remote control that comes with the player. (You can also use another remote control, as long as it is from an X96H player).

1. Press the SET button to open Settings.

2. You will now see the following screen. Use the down arrow on the remote control until you reach the bottom of the settings.

3.When you are on the System field, press OK.


4. You are now inside the System menu. Here, press OK when the cursor is on About phone (the top item).


5. You are now inside System info. Here, you can find your Wi-Fi MAC address at the bottom of the screen.

    • Related Articles

    • How to connect Windows player to Wi-Fi.

      This guide shows how you recover your internet connection on a PC with Windows Player installed. NB: This guide is made for windows 10 and up. Press F4 on your keyboard to close the Player program down on the PC that controls your infoscreen. Now ...

    • Installation - Q-Play on LG screen's

      Introduction Q-Play is a software program that allows you to display your digital signage design directly on your LG screen. With Q-Play, you can create and manage exciting content that captures the attention of your guests or colleagues in a simple ...

    • Installation Guide for IOT PowerPlug

      Introduction This installation guide is designed to assist you in the proper setup of your IoT PowerPlug, an intelligent device that automates the power-down of energy-consuming products via Q-Power. Package Contents 1 x IOT PowerPlug Requirements ...

    • Installation of Q-Play - Windows

      This guide will tell you everything you need to know on your Windows device. How to install q-play NB: Q-Play Windows is only for Windows 10 and up Please note: All settings that can put the screen to sleep, enable screen saver or other similar ...

    • Where to find information on your LG TV

      1. Navigate to the menu on your LG TV. 2. Go to General. 3. Then select System Information. 4. Take a picture of the overview, be sure to include the WebOS Version number (the number before the parentheses).